KorHarmonics lub ZUP - znajdziesz w google.Pan Kamil pisze:Poszukuje wskaźnika do mt4 który rozpoznaje formacje abcd/xabcd
Ciekawe wskaźniki do MT4 [cz. 2]
ForexClub.pl
- Forex Club Tools
- Program Podatek 7.0
- RABATY PROWIZJI
| IC Markets (-21%) | Tickmill (-10%) | XTB (Pakiet książek) | Dukascopy (narzędzia do JForex) | LMAX (-20%) | FxPro (do -15%)
Zapraszamy do kontaktu
- Forex Club Tools
- Program Podatek 7.0
- RABATY PROWIZJI
| IC Markets (-21%) | Tickmill (-10%) | XTB (Pakiet książek) | Dukascopy (narzędzia do JForex) | LMAX (-20%) | FxPro (do -15%)
Zapraszamy do kontaktu
O to chodzi ?
Edit , mala pomylka ten pierwszy pokazywal wartosci dla swiec wylacznie znizkowych . Zeby miec rowniez dla wzrostowych trzeba zainstalowac rowniez drugi wskaznik i uruchomic obydwa na wykresie . Problem w tym ze jest kiepska czytelnosc i dobrze by bylo gdyby dla swiec wzrostowych wartosci pokazywaly sie na gorze swiecy ale niestety nie wiem jak to zrobic .
Pozdro i sorki za blad .
Edit , mala pomylka ten pierwszy pokazywal wartosci dla swiec wylacznie znizkowych . Zeby miec rowniez dla wzrostowych trzeba zainstalowac rowniez drugi wskaznik i uruchomic obydwa na wykresie . Problem w tym ze jest kiepska czytelnosc i dobrze by bylo gdyby dla swiec wzrostowych wartosci pokazywaly sie na gorze swiecy ale niestety nie wiem jak to zrobic .
Pozdro i sorki za blad .
Nie masz wymaganych uprawnień, aby zobaczyć pliki załączone do tego posta.
amerro pisze:Tutaj masz mierzenie wielkości całej świecy. Może ktoś Ci zmodyfikuje...sebapl pisze:Witam. Poszukuję wskaźnika który pokazuje, zapisuje nad/pod świeczką wielkość w pipsach KORPUSA świeczki . Z góry dzięki za odpowiedź.
Ten by był super tylko żeby mierzył same korpusy , może ktoś jest w stanie to poprawić.
Proszę bardzo - oto bardziej rozbudowany wskaźnik. Trzeba by go tylko trochę zmodyfikować, żeby pokazywał wartość liczbową.
Parametry:
CandleBodyOnly:
-- TRUE: plots (absolute) distance between candle open and close
-- FALSE: plots (absolute) distance between candle high and low
RefreshEveryXMins:
-- if negative value, indicator must be refreshed manually
-- if zero, it gets refreshed every new tick (may slow your computer down, esp if attached to many charts)
-- if 1, 5, 15, 30, 60 or 240, then it refreshes whenever the first tick of a new M1, M5, M15, M30, H1 or H4 candle occurs (regardless of the timeframe of the chart to which it's attached)
Alerty:
To enable alerts, AlertPips must be set to a non-zero value. Then if the length of the AlertCandle equals or exceeds this pip value, the alert criteria has been met.
--- Set AlertCandle = 1 if you want the alert to trigger when the current candle completes (i.e. becomes candle #1 on the chart), and also meets the alert criteria, and a new candle (#0) starts to form.
--- Set AlertCandle = 0 if you want the alert to trigger immediately the current candle (#0) meets the alert criteria. (The alert should trigger only once even if the candle meets the criteria repeatedly while it is forming.)
The alert, when triggered, will be transmitted as follows:
--- If ChartAlert = true, the standard MT4 alert will sound/display.
--- If EmailSubject is non-blank, then an e-mail will be sent provided that the e-mail facilities in MT4 have been configured correctly
Parametry:
CandleBodyOnly:
-- TRUE: plots (absolute) distance between candle open and close
-- FALSE: plots (absolute) distance between candle high and low
RefreshEveryXMins:
-- if negative value, indicator must be refreshed manually
-- if zero, it gets refreshed every new tick (may slow your computer down, esp if attached to many charts)
-- if 1, 5, 15, 30, 60 or 240, then it refreshes whenever the first tick of a new M1, M5, M15, M30, H1 or H4 candle occurs (regardless of the timeframe of the chart to which it's attached)
Alerty:
To enable alerts, AlertPips must be set to a non-zero value. Then if the length of the AlertCandle equals or exceeds this pip value, the alert criteria has been met.
--- Set AlertCandle = 1 if you want the alert to trigger when the current candle completes (i.e. becomes candle #1 on the chart), and also meets the alert criteria, and a new candle (#0) starts to form.
--- Set AlertCandle = 0 if you want the alert to trigger immediately the current candle (#0) meets the alert criteria. (The alert should trigger only once even if the candle meets the criteria repeatedly while it is forming.)
The alert, when triggered, will be transmitted as follows:
--- If ChartAlert = true, the standard MT4 alert will sound/display.
--- If EmailSubject is non-blank, then an e-mail will be sent provided that the e-mail facilities in MT4 have been configured correctly
Nie masz wymaganych uprawnień, aby zobaczyć pliki załączone do tego posta.