Witam Wszystkich
Udało mi się w generatorze EA utworzyć kod który częściowo mnie zadowala .Problemem jest to że nie wiem jak dopisać lub jak to zrobić aby EA robiło open tylko w momencie przecięcia linii MA które tu użyłem 4 razy a każda z innym ustawieniem okresu i chodzi mi o to aby to open np LONG było robione kiedy po ostatnim przecięciu się jakiejkolwiek linii MA z inną linią MA zostały ułożone w kolejności że MA 20< MA50<Ma100<MA200 a zamknięcie się tej pozycji nastąpi w przypadku ponownego przecięcia się którejkolwiek z linii MA .Open Short zrobi gdy linie ułożą się MA20>MA50>MA100>MA200 . Wklejam poniżej ten kod i jak by ktoś z Was zechciał mi udzielić podpowiedzi to byłoby super
//+------------------------------------------------------------------+
//| This MQL is generated by Expert Advisor Builder |
//| http://sufx.core.t3-ism.net/ExpertAdvisorBuilder/ |
//| |
//| In no event will author be liable for any damages whatsoever. |
//| Use at your own risk. |
//| |
//+------------------- DO NOT REMOVE THIS HEADER --------------------+
#define SIGNAL_NONE 0
#define SIGNAL_BUY 1
#define SIGNAL_SELL 2
#define SIGNAL_CLOSEBUY 3
#define SIGNAL_CLOSESELL 4
#property copyright "Expert Advisor Builder"
#property link "http://sufx.core.t3-ism.net/ExpertAdvisorBuilder/"
extern int MagicNumber = 0;
extern bool SignalMail = False;
extern bool EachTickMode = False;
extern double Lots = 1.0;
extern int Slippage = 0;
extern bool UseStopLoss = False;
extern int StopLoss = 30;
extern bool UseTakeProfit = False;
extern int TakeProfit = 60;
extern bool UseTrailingStop = False;
extern int TrailingStop = 30;
int BarCount;
int Current;
bool TickCheck = False;
//+------------------------------------------------------------------+
//| expert initialization function |
//+------------------------------------------------------------------+
int init() {
BarCount = Bars;
if (EachTickMode) Current = 0; else Current = 1;
return(0);
}
//+------------------------------------------------------------------+
//| expert deinitialization function |
//+------------------------------------------------------------------+
int deinit() {
return(0);
}
//+------------------------------------------------------------------+
//| expert start function |
//+------------------------------------------------------------------+
int start() {
int Order = SIGNAL_NONE;
int Total, Ticket;
double StopLossLevel, TakeProfitLevel;
if (EachTickMode && Bars != BarCount) TickCheck = False;
Total = OrdersTotal();
Order = SIGNAL_NONE;
//+------------------------------------------------------------------+
//| Variable Begin |
//+------------------------------------------------------------------+
double Buy1_1 = iMA(NULL, 0, 20, 0, MODE_SMA, PRICE_CLOSE, Current + 0);
double Buy1_2 = iMA(NULL, 0, 50, 0, MODE_SMA, PRICE_CLOSE, Current + 0);
double Buy2_1 = iMA(NULL, 0, 100, 0, MODE_SMA, PRICE_CLOSE, Current + 0);
double Buy2_2 = iMA(NULL, 0, 200, 0, MODE_SMA, PRICE_CLOSE, Current + 0);
double Sell1_1 = iMA(NULL, 0, 20, 0, MODE_SMA, PRICE_CLOSE, Current + 0);
double Sell1_2 = iMA(NULL, 0, 50, 0, MODE_SMA, PRICE_CLOSE, Current + 0);
double Sell2_1 = iMA(NULL, 0, 100, 0, MODE_SMA, PRICE_CLOSE, Current + 0);
double Sell2_2 = iMA(NULL, 0, 200, 0, MODE_SMA, PRICE_CLOSE, Current + 0);
//+------------------------------------------------------------------+
//| Variable End |
//+------------------------------------------------------------------+
//Check position
bool IsTrade = False;
for (int i = 0; i < Total; i ++) {
OrderSelect(i, SELECT_BY_POS, MODE_TRADES);
if(OrderType() <= OP_SELL && OrderSymbol() == Symbol()) {
IsTrade = True;
if(OrderType() == OP_BUY) {
//Close
//+------------------------------------------------------------------+
//| Signal Begin(Exit Buy) |
//+------------------------------------------------------------------+
//+------------------------------------------------------------------+
//| Signal End(Exit Buy) |
//+------------------------------------------------------------------+
if (Order == SIGNAL_CLOSEBUY && ((EachTickMode && !TickCheck) || (!EachTickMode && (Bars != BarCount)))) {
OrderClose(OrderTicket(), OrderLots(), Bid, Slippage, MediumSeaGreen);
if (SignalMail) SendMail("[Signal Alert]", "[" + Symbol() + "] " + DoubleToStr(Bid, Digits) + " Close Buy");
if (!EachTickMode) BarCount = Bars;
IsTrade = False;
continue;
}
//Trailing stop
if(UseTrailingStop && TrailingStop > 0) {
if(Bid - OrderOpenPrice() > Point * TrailingStop) {
if(OrderStopLoss() < Bid - Point * TrailingStop) {
OrderModify(OrderTicket(), OrderOpenPrice(), Bid - Point * TrailingStop, OrderTakeProfit(), 0, MediumSeaGreen);
if (!EachTickMode) BarCount = Bars;
continue;
}
}
}
} else {
//Close
//+------------------------------------------------------------------+
//| Signal Begin(Exit Sell) |
//+------------------------------------------------------------------+
//+------------------------------------------------------------------+
//| Signal End(Exit Sell) |
//+------------------------------------------------------------------+
if (Order == SIGNAL_CLOSESELL && ((EachTickMode && !TickCheck) || (!EachTickMode && (Bars != BarCount)))) {
OrderClose(OrderTicket(), OrderLots(), Ask, Slippage, DarkOrange);
if (SignalMail) SendMail("[Signal Alert]", "[" + Symbol() + "] " + DoubleToStr(Ask, Digits) + " Close Sell");
if (!EachTickMode) BarCount = Bars;
IsTrade = False;
continue;
}
//Trailing stop
if(UseTrailingStop && TrailingStop > 0) {
if((OrderOpenPrice() - Ask) > (Point * TrailingStop)) {
if((OrderStopLoss() > (Ask + Point * TrailingStop)) || (OrderStopLoss() == 0)) {
OrderModify(OrderTicket(), OrderOpenPrice(), Ask + Point * TrailingStop, OrderTakeProfit(), 0, DarkOrange);
if (!EachTickMode) BarCount = Bars;
continue;
}
}
}
}
}
}
//+------------------------------------------------------------------+
//| Signal Begin(Entry) |
//+------------------------------------------------------------------+
if (Buy1_1 < Buy1_2 && Buy2_1 < Buy2_2) Order = SIGNAL_BUY;
if (Sell1_1 > Sell1_2 && Sell2_1 > Sell2_2) Order = SIGNAL_SELL;
//+------------------------------------------------------------------+
//| Signal End |
//+------------------------------------------------------------------+
//Buy
if (Order == SIGNAL_BUY && ((EachTickMode && !TickCheck) || (!EachTickMode && (Bars != BarCount)))) {
if(!IsTrade) {
//Check free margin
if (AccountFreeMargin() < (1000 * Lots)) {
Print("We have no money. Free Margin = ", AccountFreeMargin());
return(0);
}
if (UseStopLoss) StopLossLevel = Ask - StopLoss * Point; else StopLossLevel = 0.0;
if (UseTakeProfit) TakeProfitLevel = Ask + TakeProfit * Point; else TakeProfitLevel = 0.0;
Ticket = OrderSend(Symbol(), OP_BUY, Lots, Ask, Slippage, StopLossLevel, TakeProfitLevel, "Buy(#" + MagicNumber + ")", MagicNumber, 0, DodgerBlue);
if(Ticket > 0) {
if (OrderSelect(Ticket, SELECT_BY_TICKET, MODE_TRADES)) {
Print("BUY order opened : ", OrderOpenPrice());
if (SignalMail) SendMail("[Signal Alert]", "[" + Symbol() + "] " + DoubleToStr(Ask, Digits) + " Open Buy");
} else {
Print("Error opening BUY order : ", GetLastError());
}
}
if (EachTickMode) TickCheck = True;
if (!EachTickMode) BarCount = Bars;
return(0);
}
}
//Sell
if (Order == SIGNAL_SELL && ((EachTickMode && !TickCheck) || (!EachTickMode && (Bars != BarCount)))) {
if(!IsTrade) {
//Check free margin
if (AccountFreeMargin() < (1000 * Lots)) {
Print("We have no money. Free Margin = ", AccountFreeMargin());
return(0);
}
if (UseStopLoss) StopLossLevel = Bid + StopLoss * Point; else StopLossLevel = 0.0;
if (UseTakeProfit) TakeProfitLevel = Bid - TakeProfit * Point; else TakeProfitLevel = 0.0;
Ticket = OrderSend(Symbol(), OP_SELL, Lots, Bid, Slippage, StopLossLevel, TakeProfitLevel, "Sell(#" + MagicNumber + ")", MagicNumber, 0, DeepPink);
if(Ticket > 0) {
if (OrderSelect(Ticket, SELECT_BY_TICKET, MODE_TRADES)) {
Print("SELL order opened : ", OrderOpenPrice());
if (SignalMail) SendMail("[Signal Alert]", "[" + Symbol() + "] " + DoubleToStr(Bid, Digits) + " Open Sell");
} else {
Print("Error opening SELL order : ", GetLastError());
}
}
if (EachTickMode) TickCheck = True;
if (!EachTickMode) BarCount = Bars;
return(0);
}
}
if (!EachTickMode) BarCount = Bars;
return(0);
}
//+------------------------------------------------------------------+
Prośba o dokończenie lub wytłumaczenie
Kod: Zaznacz cały
//+------------------------------------------------------------------+
//| This MQL is generated by Expert Advisor Builder |
//| http://sufx.core.t3-ism.net/ExpertAdvisorBuilder/ |
//| |
//| In no event will author be liable for any damages whatsoever. |
//| Use at your own risk. |
//| |
//+------------------- DO NOT REMOVE THIS HEADER --------------------+
#define SIGNAL_NONE 0
#define SIGNAL_BUY 1
#define SIGNAL_SELL 2
#define SIGNAL_CLOSEBUY 3
#define SIGNAL_CLOSESELL 4
#property copyright "Expert Advisor Builder"
#property link "http://sufx.core.t3-ism.net/ExpertAdvisorBuilder/"
extern int MagicNumber = 0;
extern bool SignalMail = False;
extern bool EachTickMode = False;
extern double Lots = 1.0;
extern int Slippage = 0;
extern bool UseStopLoss = False;
extern int StopLoss = 30;
extern bool UseTakeProfit = False;
extern int TakeProfit = 60;
extern bool UseTrailingStop = False;
extern int TrailingStop = 30;
int BarCount;
int Current;
bool TickCheck = False;
//+------------------------------------------------------------------+
//| expert initialization function |
//+------------------------------------------------------------------+
int init() {
BarCount = Bars;
if (EachTickMode) Current = 0; else Current = 1;
return(0);
}
//+------------------------------------------------------------------+
//| expert deinitialization function |
//+------------------------------------------------------------------+
int deinit() {
return(0);
}
//+------------------------------------------------------------------+
//| expert start function |
//+------------------------------------------------------------------+
int start() {
int Order = SIGNAL_NONE;
int Total, Ticket;
double StopLossLevel, TakeProfitLevel;
if (EachTickMode && Bars != BarCount) TickCheck = False;
Total = OrdersTotal();
Order = SIGNAL_NONE;
//+------------------------------------------------------------------+
//| Variable Begin |
//+------------------------------------------------------------------+
double Buy1_1 = iMA(NULL, 0, 20, 0, MODE_SMA, PRICE_CLOSE, Current + 0);
double Buy1_2 = iMA(NULL, 0, 50, 0, MODE_SMA, PRICE_CLOSE, Current + 0);
double Buy2_1 = iMA(NULL, 0, 100, 0, MODE_SMA, PRICE_CLOSE, Current + 0);
double Buy2_2 = iMA(NULL, 0, 200, 0, MODE_SMA, PRICE_CLOSE, Current + 0);
double Sell1_1 = iMA(NULL, 0, 20, 0, MODE_SMA, PRICE_CLOSE, Current + 0);
double Sell1_2 = iMA(NULL, 0, 50, 0, MODE_SMA, PRICE_CLOSE, Current + 0);
double Sell2_1 = iMA(NULL, 0, 100, 0, MODE_SMA, PRICE_CLOSE, Current + 0);
double Sell2_2 = iMA(NULL, 0, 200, 0, MODE_SMA, PRICE_CLOSE, Current + 0);
//+------------------------------------------------------------------+
//| Variable End |
//+------------------------------------------------------------------+
//Check position
bool IsTrade = False;
for (int i = 0; i < Total; i ++) {
OrderSelect(i, SELECT_BY_POS, MODE_TRADES);
if(OrderType() <= OP_SELL && OrderSymbol() == Symbol()) {
IsTrade = True;
if(OrderType() == OP_BUY) {
//Close
//+------------------------------------------------------------------+
//| Signal Begin(Exit Buy) |
//+------------------------------------------------------------------+
//+------------------------------------------------------------------+
//| Signal End(Exit Buy) |
//+------------------------------------------------------------------+
if (Order == SIGNAL_CLOSEBUY && ((EachTickMode && !TickCheck) || (!EachTickMode && (Bars != BarCount)))) {
OrderClose(OrderTicket(), OrderLots(), Bid, Slippage, MediumSeaGreen);
if (SignalMail) SendMail("[Signal Alert]", "[" + Symbol() + "] " + DoubleToStr(Bid, Digits) + " Close Buy");
if (!EachTickMode) BarCount = Bars;
IsTrade = False;
continue;
}
//Trailing stop
if(UseTrailingStop && TrailingStop > 0) {
if(Bid - OrderOpenPrice() > Point * TrailingStop) {
if(OrderStopLoss() < Bid - Point * TrailingStop) {
OrderModify(OrderTicket(), OrderOpenPrice(), Bid - Point * TrailingStop, OrderTakeProfit(), 0, MediumSeaGreen);
if (!EachTickMode) BarCount = Bars;
continue;
}
}
}
} else {
//Close
//+------------------------------------------------------------------+
//| Signal Begin(Exit Sell) |
//+------------------------------------------------------------------+
//+------------------------------------------------------------------+
//| Signal End(Exit Sell) |
//+------------------------------------------------------------------+
if (Order == SIGNAL_CLOSESELL && ((EachTickMode && !TickCheck) || (!EachTickMode && (Bars != BarCount)))) {
OrderClose(OrderTicket(), OrderLots(), Ask, Slippage, DarkOrange);
if (SignalMail) SendMail("[Signal Alert]", "[" + Symbol() + "] " + DoubleToStr(Ask, Digits) + " Close Sell");
if (!EachTickMode) BarCount = Bars;
IsTrade = False;
continue;
}
//Trailing stop
if(UseTrailingStop && TrailingStop > 0) {
if((OrderOpenPrice() - Ask) > (Point * TrailingStop)) {
if((OrderStopLoss() > (Ask + Point * TrailingStop)) || (OrderStopLoss() == 0)) {
OrderModify(OrderTicket(), OrderOpenPrice(), Ask + Point * TrailingStop, OrderTakeProfit(), 0, DarkOrange);
if (!EachTickMode) BarCount = Bars;
continue;
}
}
}
}
}
}
//+------------------------------------------------------------------+
//| Signal Begin(Entry) |
//+------------------------------------------------------------------+
if (Buy1_1 < Buy1_2 && Buy2_1 < Buy2_2) Order = SIGNAL_BUY;
if (Sell1_1 > Sell1_2 && Sell2_1 > Sell2_2) Order = SIGNAL_SELL;
//+------------------------------------------------------------------+
//| Signal End |
//+------------------------------------------------------------------+
//Buy
if (Order == SIGNAL_BUY && ((EachTickMode && !TickCheck) || (!EachTickMode && (Bars != BarCount)))) {
if(!IsTrade) {
//Check free margin
if (AccountFreeMargin() < (1000 * Lots)) {
Print("We have no money. Free Margin = ", AccountFreeMargin());
return(0);
}
if (UseStopLoss) StopLossLevel = Ask - StopLoss * Point; else StopLossLevel = 0.0;
if (UseTakeProfit) TakeProfitLevel = Ask + TakeProfit * Point; else TakeProfitLevel = 0.0;
Ticket = OrderSend(Symbol(), OP_BUY, Lots, Ask, Slippage, StopLossLevel, TakeProfitLevel, "Buy(#" + MagicNumber + ")", MagicNumber, 0, DodgerBlue);
if(Ticket > 0) {
if (OrderSelect(Ticket, SELECT_BY_TICKET, MODE_TRADES)) {
Print("BUY order opened : ", OrderOpenPrice());
if (SignalMail) SendMail("[Signal Alert]", "[" + Symbol() + "] " + DoubleToStr(Ask, Digits) + " Open Buy");
} else {
Print("Error opening BUY order : ", GetLastError());
}
}
if (EachTickMode) TickCheck = True;
if (!EachTickMode) BarCount = Bars;
return(0);
}
}
//Sell
if (Order == SIGNAL_SELL && ((EachTickMode && !TickCheck) || (!EachTickMode && (Bars != BarCount)))) {
if(!IsTrade) {
//Check free margin
if (AccountFreeMargin() < (1000 * Lots)) {
Print("We have no money. Free Margin = ", AccountFreeMargin());
return(0);
}
if (UseStopLoss) StopLossLevel = Bid + StopLoss * Point; else StopLossLevel = 0.0;
if (UseTakeProfit) TakeProfitLevel = Bid - TakeProfit * Point; else TakeProfitLevel = 0.0;
Ticket = OrderSend(Symbol(), OP_SELL, Lots, Bid, Slippage, StopLossLevel, TakeProfitLevel, "Sell(#" + MagicNumber + ")", MagicNumber, 0, DeepPink);
if(Ticket > 0) {
if (OrderSelect(Ticket, SELECT_BY_TICKET, MODE_TRADES)) {
Print("SELL order opened : ", OrderOpenPrice());
if (SignalMail) SendMail("[Signal Alert]", "[" + Symbol() + "] " + DoubleToStr(Bid, Digits) + " Open Sell");
} else {
Print("Error opening SELL order : ", GetLastError());
}
}
if (EachTickMode) TickCheck = True;
if (!EachTickMode) BarCount = Bars;
return(0);
}
}
if (!EachTickMode) BarCount = Bars;
return(0);
}
//+-----------------------------------------------------------------Dodano po 1 minutach:
nie bardzo wiedziałem jak to zrobić z tym tag code ale już jest
Dodano po 14 godzinach 54 minutach:
Asia a mogłabyś mi wskazać dokładnie gdzie to wstawić plizzzzAsia pisze:ja tez nie ale może wystarczy dodac do warunków otwarcia pozycji warunki
&& MA20>MA50 && MA50>MA100 && MA100>MA200
dla pozycji przeciwnej odwrotnie
kod z buildera
ja pracuję na innym
zdaje sie to trzeba przebudować
tu masz zapis dla 2 par śednich
a ty potrzebujesz zapisu dla 4 par
dodaj kolejne pary i powinno działać
ja pracuję na innym
zdaje sie to trzeba przebudować
Kod: Zaznacz cały
//+------------------------------------------------------------------+
//| Signal Begin(Entry) |
//+------------------------------------------------------------------+
if (Buy1_1 < Buy1_2 && Buy2_1 < Buy2_2) Order = SIGNAL_BUY;
if (Sell1_1 > Sell1_2 && Sell2_1 > Sell2_2) Order = SIGNAL_SELL;
a ty potrzebujesz zapisu dla 4 par
dodaj kolejne pary i powinno działać
Czytaj p o w o l i
Dzień dobry, nazywam się ... jestem anonimowym hazardzistą/ką, gram na Forexie
Dzień dobry, nazywam się ... jestem anonimowym hazardzistą/ką, gram na Forexie