problem z tp przy otwarciu long

O jezykach programowania w platformach i nie tylko.
MŁA
Bywalec
Bywalec
Posty: 14
Rejestracja: 17 lis 2011, 19:56

problem z tp przy otwarciu long

Nieprzeczytany post autor: MŁA »

Witam,
mam problem z poniższym kodem, celem automatu jest tylko otworzenie pozycji L po przebiciu przez cenę Bid wybranego przez mnie poziomu, algorytm działa otwiera pozycje ale daje niewłaściwe TP bo tylko 8 tick-ów nie tyle ile chcę:


extern int MagicNumber=10001;
extern double Lots =0.1;
extern double StopLoss=0;
extern double TakeProfit=5000;
extern int TrailingStop=5000;
extern int Slippage=3;
extern double OTWARCIEPOCENIE=1;
extern double STOPLOSS=1;
extern double g = 0;
//+------------------------------------------------------------------+
// expert start function
//+------------------------------------------------------------------+
int start()
{
double MyPoint=Point;

if(Digits==3 || Digits==5) MyPoint=Point*10;

double TheStopLoss=0;
double TheTakeProfit=0;
if( TotalOrdersCount()==0 )
{
int result=0;
if((Bid>OTWARCIEPOCENIE&& Ask<TakeProfit)) // Here is your open buy rule
{
result=OrderSend(Symbol(),OP_BUY,Lots,Ask,Slippage,0,0,"EA Generator www.ForexEAdvisor.com",MagicNumber,0,Blue);
if(result>0)
{
TheStopLoss=0;
TheTakeProfit=0;
if(TakeProfit>0) TheTakeProfit=Ask+TakeProfit*MyPoint;
if(StopLoss>0) TheStopLoss=Ask-StopLoss*MyPoint;
OrderSelect(result,SELECT_BY_TICKET);
OrderModify(OrderTicket(),OrderOpenPrice(),NormalizeDouble(TheStopLoss,Digits),NormalizeDouble(TheTakeProfit,Digits),0,Green);
}
return(0);
}
}

for(int cnt=0;cnt<OrdersTotal();cnt++)
{
OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);
if(OrderType()<=OP_SELL &&
OrderSymbol()==Symbol() &&
OrderMagicNumber()==MagicNumber
)
{
if(OrderType()==OP_BUY)
{
if((Bid<STOPLOSS)) //here is your close buy rule
{
OrderClose(OrderTicket(),OrderLots(),OrderClosePrice(),Slippage,Red);
}
if(TrailingStop>0)
{
if(Bid-OrderOpenPrice()>MyPoint*TrailingStop)
{
if(OrderStopLoss()<Bid-MyPoint*TrailingStop)
{
OrderModify(OrderTicket(),OrderOpenPrice(),Bid-TrailingStop*MyPoint,OrderTakeProfit(),0,Green);
return(0);
}
}
}
}
else
{
if(TrailingStop>0)
{
if((OrderOpenPrice()-Ask)>(MyPoint*TrailingStop))
{
if((OrderStopLoss()>(Ask+MyPoint*TrailingStop)) || (OrderStopLoss()==0))
{
OrderModify(OrderTicket(),OrderOpenPrice(),Ask+MyPoint*TrailingStop,OrderTakeProfit(),0,Red);
return(0);
}
}
}
}
}
}
return(0);
}

int TotalOrdersCount()
{
int result=0;
for(int i=0;i<OrdersTotal();i++)
{
OrderSelect(i,SELECT_BY_POS ,MODE_TRADES);
if (OrderMagicNumber()==MagicNumber) result++;

}
return (result);
}

ODPOWIEDZ